EMV Readers
General Chipper / EMV Reader Troubleshooting
Here are some general EMV Reader / Credit Card Chipper troubleshooting steps not specific to any one device. - Reseat Cable (unplug / replug) - Hard / Soft reset chipper (either with power button or in some cases small reset button) - Plug cable ...
BBPOS Chipper - Troubleshooting
Reader status When you turn on the BBPOS Chipper 2X BT, the LED located beside the power button shows the reader’s current status. LIGHT MEANING None: The reader is off. Flashing blue every second: The reader is on and ready to connect to a device. ...
Unplug Pax S300
Restarting a PAX S300 and Checking Network Cable The small headphone looking cable that is plugged into the small brick that is circled runs to the power cable that the arrow is pointing at. You will want to follow this cable to the wall to unplug ...