Terminate / Relaunch Terminal

Terminate / Relaunch Terminal

  1. From the POS Terminal: Sign in as a manager.
  2. Touch “Terminate System” (bottom right corner).
  3. Touch the green button to confirm.
  4. Touch the “Relaunch” button.

    • Related Articles

    • Terminate Relaunch Terminal

      Terminate Relaunch Terminal From the POS Terminal: Sign in as a manager. Touch “Terminate System” (bottom right corner). Touch the green button to confirm. Touch the “Relaunch” button.

    • Terminal Hard Drive Swap / Replacement

      If terminals are the same make and model, you can swap out their hard drives if necessary. This article will cover how to swap a hard drive on Hisense, POSBANK, and TITAN terminals. Preliminary It is most important to ensure the terminals are the ...

    • Terminal Won't Turn On

      Terminals usually don't die completely if you have a terminal that has no lights on it and when you press the power button nothing happens try the steps below. 1. Check to see if the printer at that location has power? (Green Light & Feeds Paper) 2. ...

    • Enable Touchscreen Keyboard

      If a terminal does not have a keyboard attached but needs to use one, you can activate the touch keyboard. Enable the Touch Keyboard 1. Close out or minimize terminal software (manager menu > terminate software) 2. Right-click or Touch and Hold ...

    • Change the POS Terminal’s Time Date

      Change the POS Terminal’s Time Date Check all POS terminals to find out if the entire system is wrong or just a single terminal. If the entire system is wrong, sign in on Term 1. Touch “Change date/time”. Select the correct time and date. This may ...