Hard Reset BBPOS EMV Readers

Hard Reset BBPOS EMV Readers

Step 1: Locate the square-shaped BBPOS EMV device

Step 2: Locate the 'Reset Button' hole.

Step 3: Press & Hold the "Reset Button" by placing a small object (paperclip or toothpick) inside hole for 10 seconds.

Step 4: After pressing the "Reset Button", plug everything back in and restart the terminal.

    • Related Articles

    • General Chipper / EMV Reader Troubleshooting

      Here are some general EMV Reader / Credit Card Chipper troubleshooting steps not specific to any one device. - Reseat Cable (unplug / replug) - Hard / Soft reset chipper (either with power button or in some cases small reset button) - Plug cable ...

    • Bluetooth Chipper Pairing Android

      Pairing your Chipper with onePOS Terminal apps (Android Tablet versions) Before Pairing Chippers : Make sure all Manager Console>Setup>System Preferences>EMV Reader #XX settings match the following : The Chippers are TranSafe EMV Readers Terminal ...

    • BBPOS Chipper - Troubleshooting

      Reader status When you turn on the BBPOS Chipper 2X BT, the LED located beside the power button shows the reader’s current status. LIGHT MEANING None: The reader is off. Flashing blue every second: The reader is on and ready to connect to a device. ...

    • Bluetooth Chipper Pairing Android

      Pairing your Chipper with onePOS Terminal apps (Android Tablet versions) 1. Open the Bluetooth Settings menu by pulling down from the top of your screen to display the Quick Settings menu and hold down on the Bluetooth Icon or click the sprocket. (If ...

    • Android Tablet - Troubleshooting

      Android Tablet - Troubleshooting: Troubleshooting an Android tablet app that is not functioning can involve several steps to identify and resolve the issue. **Support Notice: All Techs make sure to understand: Is the issue happening to all tablets or ...