New Tablet Configuration (onePOS Android App)
Tablet Startup
(First Launch out of the box)
When you remove the Tablet from the box, Press the button on the lower right side of the Tablet to power the device on.
Once the device is on, unlock the screen by swiping up or entering the PIN 1234 *If prompted*
Swipe one screen to the right to find the onePOS Terminal Application.
Tap on the Terminal Icon once to open the Application.
You will be prompted for the Terminal ID as pictured below :
Enter the correct Terminal ID for your device. The Terminal ID should be provided for you by a onePOS Technician before you use the device.
After you’ve entered the Terminal ID, you will be prompted for your Server IP. This is the most often the IP Address for your Terminal 01. Any onePOS Technician will be able to identify this for you and should supply it for you before you begin initializing your tablets.
Commonly, onePOS will use the IP Address 192.168.0.101 for Terminal 01. This may not be the case for your installation, please consult a onePOS Technician before entering this information. The “ . “ is top right, center of the screen.
After you’ve loaded your data from the Server (Typically Terminal 01), you will be prompted with a normal Sign-in screen with a PIN pad. Sign in to verify your menu has populated here and you will be all set.
*If your device is configured to accept payments, a card reader will be present on the back of the tablet*
All devices with card readers attached will need to follow these steps as well :
Sign in with a Managers code (You cannot use this to
sign in if you use a Manager’s Card, a generic Tablet Manager profile is
suggested if all Managers use cards to sign into terminals) and look to the far
right column to find the Pair EMV Reader button as pictured below :
Once you press this button, you will see the
pre-paired Chipper for your tablet like this :
Tap the “bbpos_cros CHB2A6132XXXXXX” Button above “Cancel” in the middle of your screen to select the correct device.
The Terminal application will return to the PIN pad at the Sign-in screen.
*It is very important to test the card reader by starting a table and completing a sale using the attached card reader*
If you cannot use the attached card reader, please consult a onePOS Technician before taking any further actions.
Related Articles
Android Tablet Bomgar Setup
Connecting Tablet via BeyondTrust (Bomgar) This guide walks you through the step-by-step process of installing and setting up BeyondTrust (formerly Bomgar) on an Android tablet to allow remote support. Prerequisites Android tablet with internet ...Bluetooth Chipper Pairing Android
Pairing your Chipper with onePOS Terminal apps (Android Tablet versions) Before Pairing Chippers : Make sure all Manager Console>Setup>System Preferences>EMV Reader #XX settings match the following : The Chippers are TranSafe EMV Readers Terminal ...Android Tablet - Troubleshooting
Android Tablet - Troubleshooting: Troubleshooting an Android tablet app that is not functioning can involve several steps to identify and resolve the issue. **Support Notice: All Techs make sure to understand: Is the issue happening to all tablets or ...Bluetooth Chipper Pairing Android
Pairing your Chipper with onePOS Terminal apps (Android Tablet versions) 1. Open the Bluetooth Settings menu by pulling down from the top of your screen to display the Quick Settings menu and hold down on the Bluetooth Icon or click the sprocket. (If ...oneConnect by onePOS
Explore oneConnect2 by onePOS: Your Restaurant Management Tool Discover the power of oneConnect2 by onePOS, your ultimate tool for remotely monitoring live and past-day sales and restaurant information. Whether you're managing one location or ...