Change the POS Terminal’s Time Date

Change the POS Terminal’s Time Date

Change the POS Terminal’s Time  Date

  1. Check all POS terminals to find out if the entire system is wrong or just a single terminal.
  2. If the entire system is wrong, sign in on Term 1.
  3. Touch “Change date/time”.
  4. Select the correct time and date.
  5. This may take a few minutes to update on other terminals. Repeat this procedure on the affected terminals if they do not update within a few minutes.

Also, go to the back office and go to Setup – Hardware Devices. Then double-click on “Terminal #01” and make sure the checkbox for “Allow Time Set” is checked on ALL terminal hardware profiles (ex. Terminal #02, Terminal #03, etc).  If any were NOT checked, be sure to check them and click OK / Done. Then go to each POS terminal whose profile you changed and perform a terminate / relaunch.

 


    • Related Articles

    • Overlapping Time Clock Warning

      If the below error message appears when running payroll or when performing the EOD here is how to fix it. The error is telling you which employee has an overlap in their time clocks, what day it is for, and what time is being over lapped. To fox this ...

    • Change Item’s Base Price from a POS Terminal

      Change Item’s Base Price from a POS Terminal 1. From the Terminal/POS Software: Sign in as a manager. 2. Touch “Change Base Price” 3. On the left, touch the screen group where the item is that you wish to change the price of. 4. Touch the item you ...

    • How To Change Time Period Reports

      To change the reporting time periods: Default Setting for the Reporting Time Periods Are Set as Follows: Breakfast: 6:00am to 10:00am Lunch: 10:00 am to 4:00 pm Dinner 4:00 pm to 11:00 pm Late Night: 11:00 pm to 6:00 am Log into Management Console Go ...

    • Running Real-Time Reports (Flash Readings)

      Running Real-Time Reports (Flash Readings) Go to a POS terminal and sign in as a manager. (Swipe manager card) Touch “Flash Readings”. OPTIONAL – Select the time and revenue center criteria you wish to review by touching “Change start tm”, “Change ...

    • Running Real-Time Reports (Flash Readings)

      Go to a POS terminal and sign in as a manager. (Swipe manager card) Touch “Flash Readings”. OPTIONAL – Select the time and revenue center criteria you wish to review by touching “Change start tm”, “Change end tm”, or “Change rev ctrs” in the bottom ...